30mm Metal LED Tact Switches with IP67 Rating

The 30mm Metal LED Tact Switches series is an internal waterproof light-touch switch. Its short size is suitable for use in narrow spaces. It has a single-color/two-color/three-color common pole with light function, and can be wired with plugs. This momentory tact switch's operating ambient temperature range is from -20 ° C to 85 ° C , and with IP67 rating which suitable for a variety of different conditions.

The distinctive feature is the double action of the double throw switch; It will actuates when press mid-travel and , then continue pressing for another actuation at full travel. This Metal T act Switches also offer a nice tactile response which allow this series Tactile Push Button Switches to be used across a wide variety of applications and operating conditions. The applications is Medical equipment, Industrial control instruments and Computer.

تحديد

Panel Thickness: Ø30.20mm

Function:Momentary

Contact Rating: 50mA @ 12VDC.

Mechanical Life: 200,000 cycles
Contact Resistance: 50 m Ω max.
Insulation Resistance: 100M Ω min.
Operating Temperature: -20 ° C to 85 ° C

Electrical Life: 50,000 cycles make-and-break cycles.

Torque: 1~3Nm

Travel: About 0.3mm

Operation Pressure: About 1.5N

Dielectric Strength: 500 Vrms @sea level.

Ingress Protection: IP67

المواد

BUSHING : Stainless Steel / Nickel plated brass / Aluminum alloy

BASE : PBT, PC

ACTUATOR : PC ; Stainless Steel / Nickel plated brass / Aluminum alloy

INNER ASSEMBLY : POM / PA66.

SPRING : Spring steel.

SEALING : Sillicone.

O-Ring : Sillicone

TERMINAL : Brass,with silver or gold plated.

HEX NUT : Nickel plated brass

Led: 1.8V/3V/6V/12V/24V/36V/48V/110V/220V

ILLUMINATION BASE RATlNG ：

Red ， Yellow and Orange ： 20mA 1.8V;

Blue, Green and White ： 20mA 2.8V

Beads Color ： R/U/G/Y/0/W/RGB

إيجابياتنا

From the purchase of raw materials t o the finished product, all production process (product development/plating/mold and equipment processing/ metalpressing/ plasticinjection/semi-automatic and fully automated equipment assembly, etc.) are completed in the factory. Our metal pressing and plastic injection own the advantages of 100% self-made mold, from a single form to the various forms of application. And we continuously keep innovation and enhance the technology in ord er to collaborate with our customers to design the most sophisticated products. Yeswitch Electronics Co., Ltd., whether in production base or in quality assurance department in the head office, have professional equipment and technical personnel. In addition to the annual new product development, product improvement and testing are performed as annual plan to ensure that listed products maintain in best quality. Therefore, our long-term customers/partners, get the best quality of the switches .

Order Procedure

Production Procedure